MELICONI SPEEDY 210 COMBO Instrucciones De Uso página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
Check that the other buttons (blue) correspond to the functions of the original remote control; if not, it is likely that
the code found is incorrect, but is used for a very similar device, therefore repeat the procedure from point 2.
1. Look for the brand of the device that you want to control
in the TV column of table at the beginning of the booklet
and make a note of the number in the BUTTON column
(e.g. PHILIPS TV = 6). If the brand is not present, use "0".
2. Stand in front of the device you wish to control.
3. Make sure that the device is switched ON (not in stand-
by). If necessary, switch it on using the original remote
control unit (if this is still working) or the buttons present
on the device itself (these may be located on the side or
top of the device, depending on the brand and model).
4. Press and hold the Volume + and P + buttons on the
Meliconi remote control unit simultaneously for 6
seconds.
5. Release the buttons. The indicator lamp will start to fl ash
more rapidly. Press the button corresponding to the
number identifi ed in the table momentarily.
6. KEEP THE REMOTE CONTROL UNIT POINTED towards
the device you wish to control.
7. PRESS AND HOLD the TV OFF button on the MELICONI
remote control unit.
IMPORTANT!: The search process may take several
minutes
8. When the device switches off, RELEASE the button
IMMEDIATELY and PRESS the OK button.
Three long fl ashes indicate that the operation has been
completed successfully.
Check that the other buttons correspond to the functions of the original remote control; if not,it is likely that the
code found is incorrect, but is used for a very similar device, therefore repeat the procedure from point 2.
NOTE: During the search the indicator stops fl ashing and the remote control exits the programming mode in
the following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed
• if the list of codes to fi nd is terminated. If this happens, go to the www.meliconi.com website
12
D3. MANUAL SEARCH (DIGITAL TV)
SONY
SAMSUNG
PANASONIC
METRONIC
SHARP
DIGIQUEST
PHILIPS
STRONG
TELEFUNKEN
HUMAX
MIVAR/UNITED
ID SAT/ZODIAC
6
TV

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para MELICONI SPEEDY 210 COMBO

Tabla de contenido