Inserting The Batteries - MELICONI SPEEDY 210 COMBO Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
I
EN
Thank you for choosing a Meliconi remote control.
The Speedy 210 combo remote control can be used to operate either an analogue or digital TV set, as well as a
decoder, if one is connected to it (terrestrial or satellite).
Thanks to its combined keypad, there is no need to manually select the device to be controlled. Using Speedy 210
combo to control both devices (TV + DECODER), the light blue buttons automatically control the TV, and the dark
blue buttons control the DECODER, but it is also possible, with suitable settings, to make all of the buttons control a
single device.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
Its ergonomic shape and soft rubber body make it easy to grip and protect the remote control if it is knocked and
dropped.
IMPORTANT: The remote control must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they are on your original device.
Selects the next programme.
Indicator light.
Menu options confirm button
.
Turns down the TV volume
Numeric keypad.
Selects digital TV and radio
Button for exiting Teletext and
returning to normal screen.
ON/OFF for switching the decoder (STB)
on or off.
Before using the remote control, insert the batteries and programme it.
The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit continuously
until you release the button. If the light fl ashes, the batteries inserted are not charged
and are about to go fl at, therefore you must substitute them.
Important!: do not use rechargeable batteries.
8
COMBO
Keep this booklet for future reference.

INSERTING THE BATTERIES

TV ON button, sometimes needed to switch on the TV.
Turns up the TV volume.
Menu options exit button
Selects the previous programme.
For selecting an external input source for the TV.
ON/OFF switches the TV OFF and in some cases ON.
Teletext button.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido