Troubleshooting - MELICONI SPEEDY 210 COMBO Instrucciones De Uso

PROBLEM
The device does not respond and the indicator light does
not come on when a button is pressed.
When you press a button the indicator light fl ashes and
the device does not respond to commands.
The remote control does not accept the setting code
The device does not respond but the indicator light
comes on.
The remote control does not execute all commands
correctly.
complies with the following legal directives:
- Directive 2004/108/EC (EMC)
- Directive 2011/65/EC (RoHS II)
Its Declaration of Conformity (D.o.C.) is available on the internet and at the following website address:
www.meliconi.com/doc/speedy210combor5
If you have any questions about the new Speedy 210 combo remote control:
•
carefully read this Instructions Booklet which will allow you to solve most problems.
•
consult our website www.meliconi.com where you will fi nd the answers you need in the fastest, easiest way.
2 year WARRANTY
Always keep your sales receipt as proof of the validity of the product's warranty. The warranty is voided if the product is
tampered with or used improperly.
The symbol showing a wheelie bin with a cross through it which appears on the device indicates that at the end of its useful life the product must be collected
separately from other waste. Therefore, at the end of the device's life, you must take it to appropriate centres for the differentiated collection of electrical and
electronic waste, or return it to the retailer when purchasing a new device of equivalent type, on a one-for-one basis. Suitable differentiated collection to allow
subsequent recycling of the decommissioned device, with environmentally-compatible treatment and disposal, help to prevent any negative effects on the
environment and health and to promote the recycling of the materials of which the device is made. Improper disposal of the product by the user will be subject to
the sanctions in Legislative Decree No. 22/1997 (article 50 and subsequent articles of Legislative Decree No. 22/1997).
14

TROUBLESHOOTING

SOLUTION
Check that the batteries are charged and inserted
correctly and if necessary replace them with 2 new 1,5 V
AAA/LR03 alkaline type batteries.
Make sure that the batteries are new and that the remote
control is pointing at the device without any obstacles
between them.
If necessary, enter the remote control code again by
repeating the programming procedure.
You may be using an incorrect code.
Enter the remote control settings again by repeating the
programming procedure.
STANDARDS
This Meliconi product
INFO-LINE
Loris Meliconi – Chairman Loris Meliconi – Chairman