Measuring The Video / Audio Ratio (V/A) - Promax PROLINK-4C Manual De Instrucciones

To view the synchronisation pulse press key
[4] to TV + LV + SY mode, and then press key
The monitor is divided into three sections. In the top section an analogue bar
appears which indicates the level of the signal received (59 dBµV in figure 7 example).
On the left side the line synchronising pulse is represented as it would appear on the
screen of an oscilloscope. On the lower side the TV picture is shown.
Figure 7.- Line synchoronism + level + TV (TV+LV+SYNC)
Starting from the line synchronism representation, it is possible to perform a
qualitative analysis of the TV picture delivered to the end user.

4.9.1.2 Measuring the Video / Audio Ratio (V/A)

In the Video/Audio measurement mode, the screen displays the following
information:
Page 34
Figure 8.- Video/Audio rate measurement
USER'S MANUAL. PROLINK-4C
[23], turn the rotary selector
[23] or the rotary selector [4] again.
02/2003