Troubleshooting - Nilfisk VHS110N1 CR Manual De Instrucciones

Problem
The vacuum cleaner suddenly stops
Dust leaks from the vacuum cleaner
Electrostatic current on the vacuum
cleaner
04/2016

Troubleshooting

Cause
Clogged primary filter
Clogged vacuum hose
Circuit breaker activation
Activation of the level monitoring system.
The filter is torn
Inadequate filter
Non existent or inefficient grounding
13
VHS110N1 CR
Remedy
Shake the filter. Replace it if necessary.
Check the vacuum hose and clean it.
Check the setting.
Check the motor electrical input. Contact
an authorized after-sales service center if
necessary.
Emptying of the liquid container.
Replace it with another of identical type.
Replace it with another of a suitable category
and check.
Check all ground connections. Especially check
the connection at the inlet.
US
C424