Meccanica Benassi Daytona 2WD Manual De Usuario página 31

 We recommend mowing in the parallel or cross direction. Covering the previous coverage of the
machine increases the effectiveness of the blades and will improve the appearance of the mowed area.
 When travelling over uneven terrain the travelling speed may fluctuate.
5.5.4 TRAVELLING ON A SLOPE
Riding mowers models AC 92 and AC 92 4x4 can work on
slopes with an incline of up to 22° (40%).
When working on a slope it is necessary to adhere to the
following fundamentals:
 Pay increased attention when travelling on a slope.
 Always use a lower travelling speed and regulate the
travelling speed by moving the travel direction lever.
 Only travel perpendicular to the contour, i.e. up and down.
Travelling in the direction of the contour is possible with
extra attention only when turning the machine. If at all
possible, avoid travelling along the contour.
 When turning ensure that a wheel does not drive over an
elevated obstacle (rock, tree root, etc.)
 Travel slower when trav elling down a slope or over obstacles.
Pay special attention when turning and turning around on
slopes.
 If you stop on a slope, always use the parking brake.
When overloading the machine by travelling on slopes over 22° (40%) there is a risk of
serious damage to the gear box. The manufacturer is not responsible for damage caused in
this way.
31
Right
Wrong