All operating elements and connections de -
GB
scribed can be found on the fold-out page 3.
1 Operating Elements
and Connections
1 Mounting bracket
2 Setscrews for the mounting bracket (1)
3 Mains jack for connection to a socket (230 V~/
50 Hz) via the supplied mains cable
4 Support for the mains fuse; only replace a blown
fuse by one of the same type
5 Microphone for music control
6 Sensitivity control for the microphone (5)
7 Buttons to operate the unit via the system menu
(
chapter 6 and menu structure on page 19)
8 Display to show the menu settings, the display
will be extinguished shortly after the last button
has been pressed and reactivated by pressing
any button
9 Control input (3-pole XLR chassis plug)
10 Control output (3-pole XLR jack)
11 Safety lug to fix a safety rope
12 Mounting support
13 Setscrew for the mounting support (12)
2 Safety Notes
The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit is supplied with hazardous
mains voltage. Leave servicing to
skilled personnel only. Do not insert
anything through the air vents. Inex-
pert handling or modification of the
unit may cause an electric shock
hazard.
It is essential to observe the following items:
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range 0 – 40 °C).
G
Do not place any vessels filled with liquid, e. g. a
drinking glass, on the unit.
G
Do not set the unit into operation, or immediately
disconnect the mains plug from the mains socket
if
1. there is visible damage to the unit or to the
mains cable,
12
2. a defect might have occurred after a drop or
similar accident,
3. malfunctions occur.
The unit must in any case be repaired by skilled
personnel.
G
Never pull the mains cable to disconnect the
mains plug from the mains socket, always seize
the plug.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
safely mounted or not correctly operated, or not
repaired in an expert way.
G
Important for U. K. Customers!
The wires in this mains lead are coloured in ac -
cord ance with the following code:
green/yellow = earth
blue = neutral
brown = live
As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green and yellow
must be connected to the terminal in the plug
which is marked with the letter E or by the earth
symbol , or coloured green or green and yel-
low.
2. The wire which is coloured blue must be con-
nected to the terminal which is marked with the
letter N or coloured black.
3. The wire which is coloured brown must be con-
.
nected to the terminal which is marked with the
letter L or coloured red.
Warning – This appliance must be earthed.
3 Applications
The light effect panel RGBL-212DMX is suitable for
applications on stage, in clubs or party rooms and
is used for effect illumination, e. g. for emitting
coloured light or for creating running light effects
and stroboscope effects. A music-controlled light
show is possible via the integrated microphone. As
a light source, 16 super bright RGB LEDs are used
which feature a low power consumption, a low heat
development and a long life.
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.