Lubricating Tyres - Mondolfo Ferro TBE156 PRO Serie Manual De Uso

LUBRICATING TYRES

Before fitting or removing the tyre, lubricate
the beads carefully to protect them against
possible damage and to facilitate fitting
and removal operations.
For the zones to be lubricated, refer to
the diagrams.
Bring especially heavy tyres as close
as possible to the base before completing
removal.
ROTATING THE TOOL AND
BEAD BREAKER DISK (Fig. 5-6)
To pass from use of the tool (A) to use of the
bead breaker disk (B), turn the assembly
through 180° and tip it into position (D)
(fig. 5-6).
TBE 156 PRO N - DE LUXE - SUPER
Raise the wheel to the ascent ramp using
the control lever (3, Fig. 4), and move the
turntable towards the wheel. Position the
turntable on the same axis as the centre of
the wheel, so that the rim can be blocked
on the inside or in the most appropriate
position (Fig. 7-8).
5
6
7
8
53