Connections (Front Panel) - Teac AI-503 Manual Del Usuario

Connections (front panel)

Audio input (IN—LINE 2/OPT 2) connector
This connector combines analog (LINE 2) and optical (OPT 2) inputs .
o The unit will automatically switch to analog (LINE 2) or optical
(OPT 2) according to the type of plug connected .
To enable this input, turn the INPUT SELECTOR knob to select
LINE 2/OPT 2 .
Analog (LINE 2) connection
Use a cable with stereo 3 . 5 mm mini plugs to connect the head-
phone (or audio output) connector of a portable audio player, for
example, to output its audio playback through this unit .
Use a commercially-available cable with a stereo mini plug
for connection.
o When connected to the player's headphone connector, adjusting
the volume on the player might be necessary to hear its sound
from this unit .
o The sound could distort, however, if you raise the volume of the
portable music player too much . If this occurs, lower the volume
on the connected player until distortions stops and then adjust
the volume on this unit .
3 . 5 mm stereo mini plug
10
Optical (OPT 2) connection
Connect the optical digital audio output connector of a digital
audio device here .
Use a commercially-available optical cable with a mini plug
for connection.
Optical mini plug