General Information; Operating Principle; General Characteristics; Weight And Dimensions Of The Cdc-Vma Console - Leroy-Somer VARMECA 10 Instrucciones De Uso

LEROY-SOMER

1 - GENERAL INFORMATION

1.1 - Operating principle

This manual describes access to the parameter settings of
the VARMECA 10 (VMA 11 - 12 - 13 - 14) range, using a
CDC-VMA console or PEGASE VMA 10 PC software.
Combined with the VARMECA 10, these tools can simplify
programming, diagnostics and displaying parameters.

1.2 - General characteristics

1.2.1 - "CDC-VMA console" OPTION
CONTENTS OF THE KIT:
- 1 power supply unit to connect to single phase mains
supply 230 V - 50/60 Hz.
- 1 connection cable (length = 1.5 m) to connect to the
VARMECA 10.
- 1 console with digital LCD display - 2 lines of 16 characters.
- 1 parameter-setting manual.
28
20 9 5
Weight : 0,3 kg
30
PARAMETER-SETTING MANUAL
VARMECA 10
Variable speed motors and geared motors
GENERAL INFORMATION
P01 FMIN. FREQUENCE MIN.
P02 REF 0V 4MA ETALONNAGE CONSIGNE MIN. HZ
P03 F MAX. FREQUENCE MAX.
P04 REF 10V 20MA ETALONNAGE CONSIGNE MAX. HZ
P05 ACCEL.
P06 DECEL.
MODE D'ARRET
P07 STOP MODE
0 = ROUE LIBRE
P10 U / F
0 = FIXE
P11 BOOST
P23 F MOT . LECTURE FREQUENCE MOTEUR
P24 I MOT . LECTURE COURANT MOTEUR A/10
1.2.2 - "PEGASE VMA 10 programming
software" OPTION
CONTENTS OF THE KIT:
- 1 connection cable (length = 3m) to connect to the
VARMECA 10,
- 3 disks for loading the software onto a PC (or 1 CD-ROM).
- 1 parameter-setting manual.
MINIMUM PC CONFIGURATION:
- Pentium 100 MHz.
- 8 Mb of RAM.
- WINDOWS 95 or 98.
1.3 - Weight and dimensions of the
CDC-VMA console
See the following diagram.
165
HZ MIN. FREQUENCY HZ
MIN. REF. SCALING HZ
HZ MAX. FREQUENCY HZ
MAX. REF. SCALING HZ
RAMPE ACCEL. S ACCEL. RAMP S
RAMPE DECEL. S DECEL. RAMP S
STOPPING MODE
1 = RAMPE 0 = FREE WHEEL 1 = RAMP 0 = FREILAUF
LOI U / F U / F RATIO
1 = DYNAMIQUE 0 = FIXED 1 = DYNAMIC 0 = FEST
BOOST % BOOST %
HZ MOTOR FREQUENCY STATUS HZ MOTOR FREQUENZ ANZEIGE HZ
MOTOR CURRENT STATUS A/10
Ref. 3264 - 4.33/b -1.00
CDC -VMA
MIN. FREQUENZ HZ
ABGLEICH SOLLWERT MIN. HZ
MAX. FREQUENZ HZ
ABGLEICH SOLLWERT MAX. HZ
HOCHLAUF RAMPE S
AUSLAUF RAMPE S
HALTE MODUS
1 = RAMPE
U / F KENNLINIE
1 = DYNAMISCH
BOOST %
MOTOR STROM ANZEIGE A/10
MEM.