Commissioning The Cdc-Vma Console; Installation; Presentation Of The Keypad - Leroy-Somer VARMECA 10 Instrucciones De Uso

LEROY-SOMER
Variable speed motors and geared motors
2 - COMMISSIONING THE CDC-VMA
CONSOLE

2.1 - Installation

2.1.1 - Checks on receipt
When you receive your CDC-VMA console, make sure that it
has not been damaged during transport. If necessary, report
any damage to the delivery company.
THE CONSOLE KIT COMPRISES:
- the CDC-VMA console
- 1 connection cable (length = 1.5 m) with RS 232 socket.
- 1 power supply unit 230 V single phase - 50/60 Hz,
- 1 parameter-setting manual.
230 V power
supply
20-pin
socket
P01 FMIN. FREQUENCE MIN.
P02 REF 0V 4MA ETALONNAGE CONSIGNE MIN. HZ
P03 F MAX. FREQUENCE MAX.
P04 REF 10V 20MA ETALONNAGE CONSIGNE MAX. HZ
P05 ACCEL.
P06 DECEL.
MODE D'ARRET
P07 STOP MODE
0 = ROUE LIBRE
P10 U / F
0 = FIXE
P11 BOOST
P23 F MOT . LECTURE FREQUENCE MOTEUR
P24 I MOT . LECTURE COURANT MOTEUR A/10
Summary table of main
parameters
PARAMETER-SETTING MANUAL
VARMECA 10

COMMISSIONING THE CDC-VMA CONSOLE

RS232
socket
HZ MIN. FREQUENCY HZ
MIN. REF. SCALING HZ ABGLEICH SOLLWERT MIN.
HZ MAX. FREQUENCY HZ
MAX. REF. SCALING HZ ABGLEICH SOLLWERT MAX. HZ
RAMPE ACCEL. S ACCEL. RAMP S
RAMPE DECEL. S DECEL. RAMP S
STOPPING MODE
1 = RAMPE 0 = FREE WHEEL 1 = RAMP 0 = FREILAUF
LOI U / F U / F RATIO
1 = DYNAMIQUE 0 = FIXED 1 = DYNAMIC 0 = FEST
BOOST % BOOST %
HZ MOTOR FREQUENCY STATUS HZ MOTOR FREQUENZ ANZEIGE HZ
MOTOR CURRENT STATUS A/10 MOTOR STROM ANZEIGE A/10
2.1.2 - Connection
- Open the front cover of the VARMECA 10.
- Connect the 20-pin socket on the end of the cable to the
connector on the VARMECA 10 rolled cable.
- The RS 232 socket on the cable is connected to the
console socket.

2.2 - Presentation of the keypad

CDC -VMA
MIN. FREQUENZ HZ
HZ
MAX. FREQUENZ HZ
HOCHLAUF RAMPE S
AUSLAUF RAMPE S
HALTE MODUS
1 = RAMPE
U / F KENNLINIE
1 = DYNAMISCH
BOOST %
Keys for accessing and
modifying the different
parameters
Ref. 3264 - 4.33/b -1.00
VARMECA 10
connector
MEM.
Key for storing settings
37