Benning MM 7-1 Instrucciones De Servicio página 22

Digital Multimeter for
- DC voltage measurement
- AC voltage measurement
- DC current measurement
- AC current measurement
- Resistance measurement
- Diode testing
- Continuity testing
- Capacity measurement
- Frequency measurement
- Temperature measurement
Contents:
1. Operating instructions
2. Safety notes
3. Scope of delivery
4. Description of unit
5. General data
6. Ambient conditions
7. Electrical data
8. Measuring with the BENNING MM 7-1
9. Maintenance
10. How to use the protective rubber holster
11. Technical data of the measuring accessories
12. Environmental note
1. Operating Instructions
This operating manual is intended for:
- electricians and
- qualified electrotechnical persons
The BENNING MM 7-1 is designed for measurements in dry surroundings. It
must not be used in electrical circuits with rated voltages higher than 1000 V
DC/ AC (for more details, see section 6 "Ambient conditions").
The following symbols are used in the operating manual and on the
BENNING MM 7-1 itself:
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating
instructions must be followed with in order to avoid risks.
This symbol on the BENNING MM 7-1 indicates that the unit is

protection insulated (safety class II).
This symbol on the BENNING MM 7-1 indicates the fuses which
it contains.
This symbol on the BENNING MM 7-1 means that the
BENNING MM 7-1 complies with the EU directives.
This symbol appears on the display for a discharged battery.
This symbol indicates the "continuity-testing" application. The
buzzer provides an audible signal.
This symbol indicates the "diode-testing" application.
This symbol marks the range "capacity testing".
(DC) voltage or current.
(AC) voltage or current.

Earth (voltage to earth).
07/ 2016
Operating Manual
BENNING MM 7-1
BENNING MM 7-1

14