Power Source; Maintenance / Warranty Conditions - Migatronic FOCUS TIG 200 AC/DC PFC Manual De Instrucciones

Exit from the USER menu
Open/Close the gas valve in order to purge
the torch, check the gas bottle and pressure
reducer. Press "A" to Open/Close the gas. Exiting the
USER menu will close the gas anyway.
Submenu containing different options:
Exit from the submenu (go back to
main menu)
Panel LOCK
Complete lock of box. All keypads
and Encoder are disabled.
When pressing locked key pads or rotating
the encoder, the display will flash "PA.L." to
remember the active protection.
0 = unlocked (default setting)
1 = locked
All above settings are not modified via Reset
MAINTENANCE
The machine requires periodical maintenance and
cleaning in order to avoid malfunction and cancellation
of the guarantee.
WARNING !
Only trained and qualified staff members can carry
out maintenance and cleaning. The machine must
be disconnected from the mains supply (pull out
the mains plug!).
Thereafter, wait around 5 minutes before
maintenance and repairing, as all capacitors need
to be discharged due to risk of shock.

Power source

Clean the fan blades and the components in the
-
cooling pipe with clean, dry, compressed air as
required.
- A trained and qualified staff member must carry out
inspection and cleaning at least once a year.
WARRANTY CONDITIONS
Migatronic welding machines are quality-tested continuously
throughout the production process and undergo a thorough,
quality-assured final function test as assembled units.
The warranty period is 12 months for new welding machines if no
registration is carried out.
Upon registration of new welding machines within 6 weeks from
invoicing, the warranty period is extended to 24 months.
Registration must be made on the online address:
www.migatronic.com/warranty. The certificate of registry is proof
of the registration and will be sent by e-mail. The original invoice
and the certificate of registry will document to the buyer that the
welding machine falls within the scope of a 24 months warranty
period.
If registration is not made, the standard warranty period is twelve
months for new welding machines, as from the date of invoicing to
end user. The original invoice is documentation for the warranty
period.
Migatronic provides warranty according to the warranty conditions
in force through remedying defects in the welding machines that
can be proved to be caused by improper materials or workmanship
in the warranty period.
As a main rule, warranty is not provided for welding hoses as they
are considered to be wear parts; defects that occur within 6 weeks
after putting into operation and which are caused by improper
materials or workmanship will, however, be considered warranty
claims.
All forms of transport in connection with a warranty claim fall
outside the scope of Migatronic's warranty and will take place for
buyer's own account and risk.
We refer to Migatronic's warranty conditions at
www.migatronic.com/warranty
16