Battery Replacement; Troubleshooting - TFA 35.1135 Instrucciones De Uso

TFA_No. 35.1135_Anleitung
CASA - Wireless weather station
• If necessary choose another position for the outdoor transmitter and/or
basic station.
• Is the transmission successfully, you can wall mount the outdoor trans-
mitter or place it onto a flat surface.
10. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or scour-
ing agents.
• Remove the batteries from both instruments if you do not use the pro-
ducts for a long period of time.
• Keep the devices in a dry place.

10.1 Battery replacement

• Change the batteries of the outdoor transmitter when the battery sym-
bol appears on the display of the outdoor values of the basic station or
on the display of the outdoor transmitter.
• Change the batteries when the functions of the basic station become
weak.
• Please note: When the batteries are changed, the contact between out-
door transmitter and basic station must be restored – so always insert
new batteries into both devices or start a manual transmitter search.

11. Troubleshooting

Problems
No display of both instruments
No reception of
the outdoor transmitter,
Display "---"
for channel 1/2/3
26
20.11.2014 15:09 Uhr Seite 14
Solution
➜ Ensure that the batteries polarity
are correct
➜ Change the batteries
➜ No outdoor transmitter is installed
➜ Check batteries of external trans-
mitter
(do not use rechargeable batteries!)
➜ Restart the outdoor transmitter and
the basic station according to the
manual
CASA - Wireless weather station
No DCF reception
Incorrect indication
➜ Start manual search for the outdoor
transmitter: Press the RESET button
in the battery compartment of the
outdoor transmitter by using a
pointed object and then press the
SENSOR button on the basic station
➜ Choose another place for the out-
door transmitter and/or the basic
station
➜ Reduce the distance between the
outdoor transmitter and the basic
station
➜ Check if there is any source of inter-
ference
➜ Start scanning with the RCC button
➜ Wait for attempted reception
during the night
➜ Choose another place for your
product
➜ Check if there is any source of
interference
➜ Restart the devices according to the
manual
➜ Manual setting of the clock
➜ Change the batteries
➜ Basic station:
Use a pin to press the RESET button
Outdoor transmitter:
Use a pin to press the RESET button
27