Battery Replacement; Troubleshooting - TFA 35.1093 Instrucciones De Uso

TFA_No_35.1093_Anleitung_11_14
LUMAX
– Wireless weather station
• Check the transmission of 433 MHz signal from the transmitter to the display unit
(transmission range 30 m free field). Within ferro-concrete rooms (basements,
superstructures), the received signal is naturally weakened.
• If necessary choose another position for transmitter and/or basic station.
11. Additional transmitters
• The transmitter will automatically transmit temperature to the basic station on
channel 1 after batteries are inserted.
• For having more than one external transmitter, select a different channel (1 to 3)
for every transmitter by pressing the "CH" button on the transmitter while the
transmission indication LED is flashing. Press twice for channel 2 and three times for
channel 3 right after the starting up of the transmitter. The LED is flashing once for
channel 1, twice for channel 2 and three times for channel 3 (channel 4 and 5 are
not usable for this weather station).
• Press and hold the "CH" button on the display unit for 2 sec. to start initialization
manually. The channel number on the LCD of the display unit flashes and the new
transmitter will be received automatically.
• The temperature measured by the sensor is shown on the display of the display unit.
If you have installed more than one transmitter, press "CH" button (on the display
unit) to change between the outdoor transmitters.
• You can also choose an alternating channel display. Press "CH" button after the last
registered channel and all sensors appear alternating.
12. Care and maintenance
• Clean the instruments with a soft damp cloth. Do not use solvents or scouring
agents.
• Remove the batteries and pull out the plug of the socket, if you do not use the
product for a long period of time.
• Keep the instruments in a dry place.

12.1 Battery replacement

• Replace the batteries when the battery symbol of the weather station appears on
the display on the top left hand. If operation is exclusively with the mains adapter,
the battery symbol is displayed permanently.
• When the batteries of the transmitter are used up, the low battery icon appears
next to the outdoor temperature display.
• Open the battery compartments and insert the new batteries. Make sure they
have the correct polarity. Close the covers again.
• Please note:
When the batteries are changed, the contact between transmitter and receiver
must be restored – so always insert new batteries into both units or start a manual
transmitter search.

13. Troubleshooting

Problems
No indication on the display
of the weather station
No reception of the
outdoor transmitter
Display "---"
for channel 1/2/3
14
10.12.2014 18:18 Uhr Seite 8
Solutions
➜ Connect unit to mains adapter
➜ No transmitter is installed
➜ Check batteries of external transmitter
(do not use rechargeable batteries!)
➜ Restart the transmitter and weather station
according to the manual
LUMAX
– Wireless weather station
➜ Start the manual search for the transmitter
➜ Choose another place for the transmitter
➜ Reduce the distance between the trans-
➜ Check if there is any source of interference
➜ See: No transmitter reception
No DCF reception
➜ Manual time setting
➜ Wait for attempted reception during the
➜ Press RESET button
Incorrect indication
➜ Change the batteries
14. Waste disposal
This product has been manufactured using high-grade materials and components
which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in household
waste.
As a consumer, you are legally required to take them to your retail store
or to an appropriate collection site depending on national or local regula-
tions in order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg = mercury; Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical
and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is
obligated to take end-of-life devices to a designated collection point for
the disposal of electrical and electronic equipment, in order to ensure
environmentally-compatible disposal.
15. Specifications
Basic station
Measuring range indoor temperature:
Resolution:
Operating temperature:
Power consumption:
Backup:
Housing dimensions:
Weight:
and/or the weather station
mitter and the weather station
night
-10...+60°C
0,1°C
0...+50°C
Power adaptor 230 V ~ 50 Hz
Output 4,5V 300 mA
Batteries 2 x 1,5 V AAA
80 x 25 x 180 mm
243 g (instrument only)
15