Operating - Medisana HM 858 Instrucciones De Manejo

Aparato de masaje manual
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
GB

3 Operating

3.1
Getting
started
3.2
Starting the
Massager
3.3
The massage
3.4
Switching off
the unit
14
Ensure that the appliance is switched off (function selector switch
in the lowest position) before plugging into the mains. You may use the
device directly or you may attach a pair of the massage attachments
onto the massage heads with red light
Then plug into an appropriate socket.
Use your thumb to gently push the selector switch
it clicks into place and you can feel the massage head vibrate.
The switch features 3 positions:
1. Down position: OFF
2. Middle position: Only massage
3. Up position: Heat and massage
You can massage yourself or a partner. Switch the unit on as
described above and apply to the part of body to be massaged.
Do not use pressure; just place it lightly on the body. The massage
effect is brought about by the vibration of the unit alone.
Simultaneous use of the red light function improves the effective-
ness of the massage. Do not concentrate on one side of the body
for too long (max. 3 minutes); rather change the area of massage
frequently.
You can control the massage frequency by turning the massage
1
speed selector
massage and in anti-clockwise direction to slow down the massage
speed.
By choosing the direction of the massage you can decide on the
effect: a massage towards the heart relaxes, a massage away from
the heart stimulates.
For a full body massage, please refer to "Safety Information".
Each session should not exceed a duration of 15 - 20 minutes. The
device will switch off automatically after 20 minutes. To ensure
positive results, please use the massager regularly.
The application should feel pleasant. In case you experience pain or
or find the massage unpleasant, please stop the session and
consult your doctor.
After treatment, switch the massage device off, pull out the mains
Switch off the unit by returning the function selector switch
original position. When you have finished using the unit, unplug it
from the mains outlet.
4
:
. Turn it in clockwise direction to speed up the
2
is
5
E
2
upwards until
g
g
2
to its

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

88292

Tabla de contenido