Operating - Medisana HM 886 Instrucciones De Manejo

GB

3 Operating

3.1
Getting
started
3.2
Starting the
Massager
3.3
The massage
3.4
Switch on
redlight
3.5
Switching off
the unit
14
Ensure that the appliance is switched off (function selector switch
in the lowest position) before plugging into the mains. You may use the
device directly or you may attach a pair of the massage attachments
onto the massage heads
Then plug into an appropriate socket.
Use your thumb to gently push the selector switch
it clicks into place and you can feel the massage head vibrate.
The switch features 3 positions:
1. Down position: OFF
2. Middle position (LO): Massage, low intensity
3. Up position (HI): Massage, high intensity
•
You can massage yourself or a partner. Switch the unit on as
described above and apply to the part of body to be massaged.
Do not use pressure; just place it lightly on the body. The massage
effect is brought about by the vibration of the unit alone.
Simultaneous use of the red light function improves the effective-
ness of the massage. Do not concentrate on one side of the body
for too long (max. 3 minutes); rather change the area of massage
frequently. You may vary the position of the massage head according
to your personal needs in 5 positions. Therefore, press the release
1
button and move the upper part of the device to the desired
position and release the button.
•
By choosing the direction of the massage you can decide on the
effect: a massage towards the heart relaxes, a massage away from
the heart stimulates.
•
For a full body massage, please refer to "Safety Information".
•
Each session should not exceed a duration of 15 - 20 minutes. To
ensure positive results, please use the massager regularly.
•
The application should feel pleasant. In case you experience pain or
or find the massage unpleasant, please stop the session and
consult your doctor.
•
After treatment, switch the massage device off, pull out the mains
plug and let the device cool down.
The red light treatment can be switched on by pressing the switch for
2
redlight to „ON" position. The red light source illuminates the
massage head then. To switch redlight off, move the switch to „OFF"
position.
Switch off the unit by returning the function selector switch
original position ("OFF"). When you have finished using the unit, unplug
it from the mains outlet.
4
.
3
is
5
E
3
upwards until
g
3
to its