Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Maintenance
schedule
The following
is a list of the maintenance
that must be performed
on the machine.
Most of
the items are described
in the Maintenance
section.
The user must only carry out the main-
tenance
and service work described
in this Operator's
Manual.
More extensive
work must
be carried
out by an authorised
service workshop.
Daily
Weekly
Monthly
Maintenance
Maintenance
Maintenance
Maintenance
Clean the outside
of the machine.
X
Make sure the throttle trigger lock and the
throttle function
correctly
from a safety point
of view.
X
Check that the stop switch works
correctly.
X
Check that the cutting attachment
does not
rotate at idle.
X
Clean the air filter. Replace if necessary.
X
Check that the guard is undamaged
and not
cracked.
Replace
the guard if it has been
exposed
to impact or is cracked.
X
Check that the trimmer
head is undamaged
and not cracked.
Replace the trimmer head
if necessary.
X
Check that the locking
nut of the cutting
equipment
is tightened
correctly.
X
Check that nuts and screws
are tight.
X
Check that there are no fuel leaks from the
engine, tank or fuel lines.
X
Check the starter and starter cord.
X
Clean the outside
of the spark
plug. Re-
move it and check the electrode
gap. Adjust
the gap to 0.6 mm or replace the spark p_ug.
Check that the spark plug is fitted with a
suppressor.
X
Clean the outside
of the carburetor
and the
space around it.
X
Check that the bevel gear is filled three-
quarters
full with lubricant.
Fill if necessary
using special
grease.
X
Check the fuel filter from contamination
and
the fuel hose from cracks
or other defects.
Replace
if necessary.
X
Check all cables and connections.
X
Check the clutch, clutch
springs and the
clutch drum for wear. Replace
if necessary
by an autorized
service workshop.
X
Replace
the spark plug. Check that the
spark plug is fitted with a suppressor.
X
Clean or replace the spark arrestor
mesh
on the muffler.
X
23
Publicidad
