GENERAL
SAFETY
PRECAUTIONS
Important
IMPORTANT?
The rnechine is only designed
for trimming grass, grass clearing and/or
forestry clearing.
The only accessories
you can operate with
this engine unit are the cutting attachments
we
recommend
in the section on Technical data,
Never use the machine if you are tired, if you
have drunk alcohol, or if you are taking medi-
cation that could affect your vision, your judge-
ment or your co-ordination.
Never use the machine in extreme weather
conditions such as severe cold, very hot and/
or humid climates.
Wear personaI protective equipment.
See in-
structions
under the heading Personal
protec-
tive equipment.
Never use a machine that has been modified
in any way from its original specification,
Never use a machine that is faulty, Carry out
the checks, maintenance
and service instruc-
tions described in this manual. Some mainte-
nance and service measures
must be carried
out by trained and qualified specialists, See
instructions under the heading Maintenance,
All covers and guards must be fitted before
starting, Make sure the spark plug cap and
lead are not damaged.
Otherwise you could
get an electric shock, The machine operator
must ensure that no people or animals come
closer than 50 feet (15 meters) while working,
When several operators are working in the
same area, the safety distance should be at
least 50 feet (15 meters).
,_
WARNING:
Using an incorrect
cutting attachment
or an incorrectly
filed
blade can increase
the risk of
accidents.
_
WARNING:
Never allow
children
to use or be in the vicinity
of the
machine.
As the machine
is equipped
with a spring-loaded
stop switch and
can be started by low speed and
force on the starter handle,
even
small children under
some circum-
stances can produce
the force neces-
sary to start the machine.
This can
mean a risk of serious
personal
inju-
ry. Therefore
remove the spark plug
cap when
the machine
is not under
close supervision.
Personal protective
equipment
IMPORTANT?
A clearing saw, brushcutter
or trimmer can be dangerous
if used incor-
rectly or carelessly, and can cause serious
or fatal injury to the operator or others. It is
extremely important that you read and un-
derstand the contents of this operator's
manual. You must use approved personal
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
i_
WARNING:
Listen out for warn-
ing signals or shouts
when you are I
wearing
hearing
protection,
Always
I
remove your hearing
protection
as
soon as the engine stops.
HELMET
A helmet should
be worn if the brush being
cleared
is taller than 6 feet (2 meters).
HEARING
PROTECTION
Wear hearing protection
that provides
adequate
noise reduction.
EYE PROTECTION
Always
wear approved
eye protection,
if
you use a visor then you must also wear
approved
protective
goggles.
Approved
protective
goggles
must comply with stan-
dard ANSI Z87.1.
GLOVES
Gloves should
be worn when necessary,
e.g., when fitting cutting
attachments.
BOOTS
Wear sturdy, non-slip
boots.