Program; Menu - Chauvet Professional VIP 5162 Signal Processor Manual Del Usuario

PROGRAM

1st Level 2nd Level
DVI1
VGA1
YPbPr1
PROGRAM
SOURCE 1 CV1
CV2
USB1
SDI1
DVI2
VGA2
YPbPr2
PROGRAM
SOURCE 2
CV3
CV4
USB2
PLEASE SELECT
PREVIEW 1,2

MENU

st nd
1 Level 2 Level
ZOOM
ADJUST
INPUT
VGA
ADJUST
SDI
USB
VIP™ 5162 Signal Processor User Manual Rev. 1
Sets live and preview 1 to input port DVI1.
Sets live and preview 1 to input port VGA1.
Sets live and preview 1 to input port VGA1. This option enables component support and is used only when the
input originates from a component source. Note: 3xBNC to VGA adapter is not included.
Sets live and preview 1 to input port CVI1. Note: CVI1 and SDI1 share a physical port.
Sets live and preview 1 to input port CV2.
Sets live and preview 1 to input port USB1.
Sets live and preview 1 to input port SDI1. Note: SDI1 and CVI1 share a physical port.
Sets live and preview 2 to input port DVI2.
Sets live and preview 2 to input port VGA2.
Sets live and preview 2 to input port VGA2. This option enables component support and is used only when the
input originates from a component source. Note: 3xBNC to VGA adapter is not included.
Sets live and preview 2 to input port CVI3.
Sets live and preview 2 to input port CVI4.
Sets live and preview 2 to input port USB2.
<Program>
This message appears if
rd th
3 Level 4 Level
INPUT DETAIL
H SIZE 0–xxxx
V SIZE 0–xxxx
H POS 0–xxxx
V POS 0–xxxx
RESET
NO/YES
CONFIG
X
VGA3
Y
X
VGA4
Y
NTSC(4871)
SDI SD
SUPPORT
PAL(5761)
MOVIE/
USB PLAY
TYPE PHOTO
USB 1–10
PHOTO
TIME
Description
is pressed without
th
5 Level
Shows information about the currently selected live and preview.
Sets the width of the zoom into the selected live output— xxxx is the
maximum number of pixels.
Sets the height of the zoom into the selected live output— xxxx is the
maximum number of pixels.
Sets the horizontal position for the zoom of the selected live output—
xxxx is the maximum number of pixels.
Sets the vertical position for the zoom of the selected live output—
xxxx is the maximum number of pixels.
Returns the selected live output to the default size as position as set
in Output Format or Out Res. (See
1–161
1–31
For future use.
1–161
1–31
Sets SDI1 to NTSC format
Sets SDI1 to PAL format
Sets the USB mode.
Sets the display time for each photo in USB photo mode. Use only
jpg file format for photos.
4. Operation | Front Panel Configuration Buttons
<Preview 1> <Preview 2>
or
Description
OUT RES)
being pressed.
Page 21 of 140