02
2.1
Safety Marking
2.2
Safety Devices
The following Safety Devices are installed:
1. Safety valve set at 2.4 bar 0/+10%
2. Electromagnetic lock to prevent the door from opening while the cycle is running
3. Resistance over temperature thermostats
2.3
Safety Notes
1. The manufacturer is liable for the marketed product in accordance with current
regulations.
2. The manufacturer's liability will expire when operations are carried out on the device, or a
part of it, by unskilled personnel or using non-original spare parts.
3. There should be no potential risk of explosion and/or fire in the room where the autoclave
is installed.
2.4
Disposal
Refer to annex
Cod. 0Z00H0004
SAFETY
VOLTAGE
DISCONNECT
THE MAINS
SUPPLY
BEFORE
REMOVING
THIS COVER
ENGLISH
HIGH
TEMPERATURE
EARTH
CONNECTION
9