MINOX BN 7x50 DCM Manual De Instrucciones página 28

Operational mode Sub­menu
Tilt TLT Display
Set LED brightness
Barometer Barometer display
Set measuring unit
SLP setting
Barometer history Display barometer
history
Read time interval for
barometer history
Altimeter Display
Set measuring unit
Manual calibration
54
Operation
Turn mode dial to TLT mode
Push On / Off button; with Up / Down buttons,
choose brightness levels 1-5
Turn mode dial to barometer display in hPa
Push Up / Down buttons to choose desired measuring unit
in: inHg / mmHg / hPa
Push On/Off to enter sea level air pressure mode and
Up/Down to set = 1300 hPa
Turn mode dial to bar diagram display
Set interval history reading with the Up / Down
buttons for every: 2, 4, 6 or 8 hours
Turn mode dial to ALT mode
Push Up / Down buttons to set measuring unit in
meters (m) or feet (ft)
Push On / Off button to enter SET ALT mode
Push Up / Down buttons to set altitude manually
Push On / Off button to save setting and
enter ALT mode
LED display
TLT with center cross and inclination angle
SET LED 1 to 5
BAR and inHg, mmHg or hPa value
BAR and inHg, mmHg or hPa value
SET SLP
Bar diagram and recorded air pressure values in hPa,
inHg or mm Hg at intervals of 2, 4, 6 or 8
Bar diagram and recorded air pressure values in hPa,
inHg or mm Hg at intervals of 2, 4, 6 or 8
ALT and value
Value in meters (m) or feet (ft)
SET ALT
Value in meters (m) or feet (ft)
Value in meters (m) or feet (ft)
Comment
The brightness of the display will change after each
level change
This value must be set to 1013
55