Contents
GB
1
2
3
Applications . . . . . . . . . . . . . . . . . . . . . . . 13
4
4.1 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 14
6
7
DMX Control . . . . . . . . . . . . . . . . . . . . . . 16
8
9
10.1.2 14-channel mode . . . . . . . . . . . . . . . . . . 18
12
All operating elements and connections de -
scribed can be found on the fold-out page 3.
1
Operating Elements
and Connections
Controller with spotlights, stand (fig. 1)
1 Mains input for connection to a socket (230 V~ /
50 Hz) via the supplied mains cable
2 Support for the mains fuse
Only replace a blown fuse by one of the same
type.
3 Display
4 Control buttons
5 Jack FOOT CONTROLLER for connection of
the remote controller via the supplied cable
6 DMX signal input (3-pole XLR) for connection of
a light controller;
pin 1 = ground, 2 = DMX-, 3 = DMX+
7 DMX signal output (3-pole XLR) for connection
to the DMX input of another DMX light effect unit;
pin 1 = ground, 2 = DMX-, 3 = DMX+
8 Microphone for music-controlled light effects
9 Control SENSITIVITY to adjust the microphone
sensitivity for music-controlled light effects
10 Connection cable between the controller and
the spotlight
11 Mounting and setscrew to hold the spotlight (14)
in place
On the upper side of the controller there are
additional threaded holes; if required, turn out
the screw and fix the spotlight there.
12 Setscrews to fix the controller at both sides on
the stand tube (15)
13 Setscrews for the vertical inclination of the spot-
light (14)
14 LED spotlight
15 Stand
Remote controller (fig. 2)
16 Jack for connection to the jack FOOT CON-
TROLLER (5) at the controller via the supplied
cable
17 Foot switch AUTO to select an automatic show
program