DeWalt D26676 Manual De Instrucciones página 9

Planing Tip: For a smoother appearance, fasten a piece of scrap
wood to the end of the piece you are planing. Don't stop planing
until the cutting blades of the planer are past your work piece and
into the scrap material.
Parking Foot (Fig. 1)
Your planer is equipped with a parking foot (K) that automatically
lowers into place when the tool is lifted from the work surface. When
planing, the parking foot raises as the tool is pushed forward. When
the parking foot is lowered, the planer can set on the work surface
without the blade touching.
CAUTION: Do not lock the trigger switch on and engage the
parking foot. The vibration of the running motor will cause the
planer to move, possibly falling from the work piece.
MAINTENANCE
Your D WALT power tool has been designed to operate over a
E
long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular
cleaning.
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and removing
accessories, before making any adjustments or removing/installing
attachments or accessories.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main housing with dry
air as often as dirt is seen collecting in and around the air vents.
Wear approved eye protection and approved dust mask when
performing this procedure.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories
Since accessories, other than those offered by
WARNING:
D WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D WALT, recommended accessories should be used
E
with this product.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement)
should be performed by authorized service centers or other qualified
service personnel, always using identical replacement parts.
SPECIFICATIONS
Voltage
Power input
No load speed
7
D26676
120 V
550 W
17,000 min -1