Multiplex SMART SX FLEXX Manual De Instrucciones página 82

What to do if?
SMART SX FLEXX
The functions of the Tamiya multi-function unit cannot be operated correctly,
or the direction of movement of one or more steering functions is incorrect.
Cause
In Tamiya models:
Tamiya special function is not
activated.
Non-Tamiya models:
Adjust the direction of movement of
the servos.
In my Tamiya model, the light and hazard flasher cannot be switched on or
switching between hooter and parking supports does not function.
Cause
Tamiya special function is not
activated.
Solution
Make sure that the Tamiya special
function is activated (see section 3.6
"Switching the special function for
Tamiya model trucks and tanks on and
off" on page 58).
Repeat the procedure "Teaching the
actuator" (see section 5.3 "Teaching
actuator paths and directions" on page
67 or section 6.3 "Teaching actuator
paths and directions" on page 72).
Make sure that you adhere to the
sequence and directions of the actuator
movements as specified.
Adjust the direction of movement of the
servos on the SMART SX FLEXX
transmitter (see section 3.5 "Servo
reverse" on page 58).
Solution
Activate the Tamiya special function,
see section 3.6 "Switching the special
function for Tamiya model trucks and
tanks on and off" on page 58.
Page 81