2Music Play; System Setting; Instalation - npg DHT31 NRS Manual De Usuario

6. STB Operation
6.3.2.2 Music Play
(1) How to access the photo thumbnails.
Once set up the decoder, press <Menu> to access the "Main Menu". Then
press <CH+/CH-> to stand over the item "and press <V-/V+> MULTIMEDIA
standing at" Photo "(picture element is selected when the photo icon in the
middle of the screen). Then press <OK> to access "Thumbnail Photo".
(2) keys available in "Photo Thumbnail" and their functions are explained below:
Press <V-/V+> to move the cursor over the file when the selected item is in
"Thumbnail".
Press <V-/V+> to move the cursor over the elements of first refusal when
the item is selected in "Top Option."
Press <V-/V+> to move the cursor around the Navi bar items, when the se-
lected item is in "Navi Bar".
3. Movie
6.3.3. 1 Movie thumbnail
Focusing on "Main Menu" -> "MULTIMEDIA" -> "Movie", press <OK> to enter
"Movie Thumbnail" page.
6.3.3.2Movie Play
"Movie Play" screen can be entered by pressing <Yellow> key in "Movie Thumb-
nail" or choose "Exit & play" in "Top Option".
<Menu>: Press <menu> to return to "Main Menu".
<Red>: Press <Red> to play backward in trick mode. The modes include "X2",
"X4", "X8", "X16", "X32", "X1/2", "X1/4" and "X1".
<Green>: Press <Green> to stop playing movie.
<Yellow>: Press <Yellow> to pause/resume playing.
<Blue>: Press <Blue> to play forward in trick mode. The modes include "X2",
"X4", "X8", "X16", "X32", "X1/2", "X1/4" and "X1".
Press<Navi> to display/hide the Navi bar.

6.4 System Setting

In "Setup" menu, user can set/change STB system parameters.
(1)Press <Menu> to enter "Main
Menu".
(2)Press <Up/Down> until switching
to "SETUP&MORE" item.
(3)Press <Left/Right> until switching
to "Setup".
(4)Press <OK> to enter "Setup" menu.
6.4. 1 Installation
In "Installation" sub-menu, user can set service scan and output parameters.
See chapter 6.4 for step (1) ~ (4) .
(5)Press <Left/Right> to select sub-
menu of "Installation".
(6)Press <OK> or <Down> to enter
the sub-menu.
6.4. 1 . 1 Antena setting
In "Antenna Setting" bar, user may set Antenna power ON/OFF.
Note:
After "Set Default" operation, the parameter value would be "OFF".
11
www.npgtech.com