2My Box; Actualización Del Software; 5Set Default - npg DHT31 NRS Manual De Usuario

6. STB Operation
6.4. 1 .2 Country Setting
Change of "Counrty Setting" would re-set the default frequency channel table
in service auto scan, and re-set the time-zone as the updated country region.
Note:
(1)"Country Setting" is only enabled when there is no service stored in data-
base. And if there is, the bar is disabled and pressing <Up/Down> would
bypass the bar.
(2)After "Set Default" operation, the parameter value would be "TaiWan".
6.4. 1 .3 LCN
In "LCN" bar, user can select whether the LCN function is enabled.
6.4.2 My Box
In "My Box" sub-menu, user can set STB date and time.
6.4.3 My Password
In "Password" sub-menu, user can set menu/channel/censorship and
change the password. The initial password is "0000" .
6.4.4 Actualización del Software
In "SW Update" sub-menu, user can update the STB application SW. Illustra-
ted as figure 38.
See chapter 6.4 for step (1) ~ (4).
(5)Press <Left/Right> to select sub-
menu of "SW Update".
(6)Press <OK> or <Down> to enter
the sub-menu.
6.4.5 Set Default
In "SW Update" sub-menu, user can update the STB application SW. Illustra-
ted as figure 38.
See chapter 6.4 for step (1) ~ (4).
(5)Press <Left/Right> to select sub-menu of "SW Update".
(6)Press <OK> or <Down> to enter the sub-menu.
12
www.npgtech.com