Ingersoll Rand ELK25-1NS25 1PH Especificaciones Del Producto página 18

EN
Hook and Suspension Assemblies
1. Lubricate the lower hook and hook latch pivot points. Hook and latch should pivot freely.
2. Use Ingersoll Rand 47580935001 oil.
Trolley (optional feature)
Refer to the manufacturer's literature for correct lubrication. For additional information on
motorized trolleys, refer to Parts, Operation and Maintenance Manual Form Number MHD56108.
Load Chain
WARNING
Failure to maintain a clean and well lubricated load chain will result in rapid load chain wear that
can lead to chain failure which can cause severe injury, death or substantial property damage.
● Lubricate each link of the load chain weekly. Apply new lubricant over existing layer.
● In severe applications or corrosive environments, lubricate more frequently than normal.
● Lubricate hook latch pivot point with the same lubricant used on the load chain.
● To remove rust or abrasive dust build-up, clean chain with an acid free solvent. After cleaning,
lubricate the load chain.
● Use Ingersoll Rand 47580935001 oil.
Gears
The gear compartment is filled with grease at the factory. Replacement of the grease for the life
of the hoist is not required.
18 Form 47584686001 Edition 5