Publicidad
Specifications
Superstructure
Boom
11 m – 33,5 m four (4) section, full power sequenced synchronized
boom. Maximum tip height: 35,9 m.
Folding lattice extension
10,1 m – 17,1 m folding lattice swingaway extension offsettable at
0°, 25° or 45°. Stows alongside base boom section. Maximum tip
height: 52,6 m.
*Lattice extension
Two (2) 6,1 m lattice extensions used with the swingaway extension
to increase the length to 23,2 m or 29,3 m. Maximum tip height:
64,6 m.
Boom nose
Quick reeving type boom nose with 3 nylatron sheaves (TMS750E),
(4 for TMS760E [ 55 t rating]) mounted on heavy duty tapered
roller bearings with removable pin-type rope guards. Removable
auxiliary boom nose with removable pin type rope guard.
Boom elevation
One double acting hydraulic cylinder with integral holding valve
provides elevation from -3˚ to 78˚.
Load moment and anti-two block
Standard "Graphics Display" load moment and anti-two block
system with audio-visual warning and control lever lockout. These
systems provide electronic display of boom angle, boom length,
radius, tip height, relative load moment, maximum permissible load,
load indication and warning of impending two-block condition.
The standard "Work Area Definition System" allows the operator
to pre-select and define safe working areas. If the crane approaches
the pre-set limits, audio-visual warnings aid the operator in avoiding
job-site obstructions.
Cab
High visibility, all steel cab with acoustical lining and tinted safety
glass throughout. Deluxe seat with armrest mounted hydraulic single
axis controls. Dash panel incorporates gauges for all engine functions.
Other standard features include: sliding side and rear windows, hot
water heat, electric windshield wash/wipe, circulating air fan, sliding
skylight with sunscreen and electric skylight wiper, fire extinguisher,
cup holder, air conditioning.
Swing
Planetary swing with foot applied multi-disc wet brake. Spring
applied, hydraulically released parking brake. Two position plunger
type and 360˚ mechanical house locks operated from cab. Maximum
speed: 2.0 rpm.
4
Counterweight
4990 kg consisting of (2) 2495 kg sections. *Optional "Heavy Lift"
package consisting of (1) additional 2495 kg section, for a total of
7484 kg. Hydraulic installation/removal.
Hydraulic system
Four main gear pumps with a combined capacity of 513 L/m.
Individual pressure compensated valve banks. Maximum operating
pressure: 27,6 Mpa.
Return line type filter with full flow by-pass protection and service
indicator. Replaceable cartridge with beta rating of 5/12/16. 643
L reservoir. Remote mounted oil cooler with thermostatically
controlled electric motor driven fan.
Hoist main and auxiliary hoists- HP30A-19G
Planetary reduction with integral automatic brake, electronic hoist
drum rotation indicator, and hoist drum cable follower. Grooved
drum.
Single line pull:
Maximum single line speed:
Maximum permissible line pull:
Rope diameter:
Rope length:
Maximum rope stowage:
Carrier
Chassis
Triple box section, four-axle carrier, fabricated from high strength,
low alloy steel with towing and tie-down lugs.
Outrigger system
Four hydraulic telescoping, single stage, double box beam outriggers
with inverted jack and integral holding valves. Quick release type
steel outrigger floats 610 mm (24 in) diameter. Three position
setting with fully extended, intermediate (50%) extended and
fully retracted capacities. Includes Outrigger Monitoring System.
Maximum outrigger pad load:
Outrigger controls
Located in the superstructure cab and both sides of chassis. Level
indicator at each control station.
*Denotes optional equipment
1st layer:
8226 kg
3rd layer:
6994 kg
5th layer:
6084 kg
162 m/min
7620 kg
with standard 6 x 37
class rope
7620 kg
with optional 35 x 7
class rope
19 mm
152 m
256 m
41 227 kg
Publicidad
