Hazards - ProCharger XL Instrucciones De Uso

Hazards

Hazards associated with use of the charger
The charger has been designed in accordance with the latest
engineering standards and the recognized rules for technical
safety.
Nevertheless, if wrongly used, there is a risk to
• the life and limb of the operator or third parties
• the charger itself
• other property as a result of subsequent damage
Anybody who is involved with the operation, use, servicing or
maintenance of the charger must closely follow these operating
instructions. Malfunctions that affect safety are to be avoided
and, if necessary, rectified promptly.
Do not open the device. Unauthorized opening of the housing
and incorrectly performed repairs or modifications to the
electronics, housing, cables etc. can present hazards to the
user of the device and will invalidate the guarantee. Never
connect or disconnect any cables during a thunderstorm, and
do not use the device during a thunderstorm.
During operation, and at least once a week, the charger must
be checked for proper operation while the power cord and the
charging cable must be checked for externally visible damage.
Note 1.1
Position the charger, the battery and the power cord and
charging cables in such a way that nobody can tread on or
stumble over them.
Do not operate the device during frost or when there is a risk
of frost in order to prevent the formation of condensation.
To avoid the risk of fire and electric shock, the device must
not be exposed to rain or moisture. No liquid of any kind
48
Cortesía de www.bateriasdelitio.eu
must be allowed to enter the device. For reasons of both
safety and official approval (CE mark), unauthorised
modification and/or changes to the device or the connecting
cables are not permitted.
Consult a qualified workshop if you have any doubts about the
use, safety or connection of the device.
Every time you use it, check that the charger and its connecting
cables are not damaged. Never start using the device if the
protective insulation on the power cord or charging cables is
damaged (crushed, torn, sheared off etc.). If you find that
there is any damage, do not start to use the charger, but take
it to a suitable workshop. Even if the device does not appear
to function at all, it must be disconnected immediately and
sent back to the manufacturer for repair.
Do not use the charger in rooms (or under unsuitable
environmental conditions) where combustible gases, vapours
or dusts are – or may be – present. Never cover the ventilation
slots or housing. Do not put the device close to sources of hot
air such as heaters. Do not expose the device to direct sunlight,
heavy dust, mechanical vibrations or impacts. Do not use the
device close to or on materials that are com-bustible or easily
ignited. Place it on a suitable, non-combustible surface (e.g.
a thick porcelain tile or stone slab. Do not allow the charging
cable or the power cord to lie close to inflammable materials.
Do not use the charger in a boat or other watercraft. Before
charging, the battery must be removed and charged in a
suitable place.
Neither the charging cable nor the power cord may be
modified by, for instance, lengthening or shortening.
Cortesía de www.bateriasdelitio.eu
Hazards
49