ProCharger XL Instrucciones De Uso página 27

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Hazards
Only operate the charger in a moderate climate, never in a
tropical climate. Refer to the "Technical Specifications" chapter
(see page 31) for the permissible ambient conditions. Choose a
location for the device that is sufficiently stable, large and flat,
as there would be a risk of injury from the weight of the
charger should it fall down. It is also possible that the device
would be damaged. Do not use the device if it has been
subjected to a heavy impact or if it has been dropped. In such
a case, the device must be checked and, if necessary, repaired
at a qualified workshop.
Although the charger does feature a large number of safety
functions, the possibility of excessive heating of the battery or
the device can never be totally ruled out. Make sure that it is
adequately ventilated when operating. Never cover the charger
or the battery to which it is connected. Always leave enough
space (at least 10 cm) between the charger and the surroun-
dings/wall, so that air circulation is not blocked.
Never connect the device to the power supply straight after
you have brought it from a cold room into a warm one.
The condensation that forms may lead to malfunction or
damage, and there is also a risk of a potentially fatal electric
shock.
Allow the charger (and the battery) to warm up to
room temperature before you connect the charger to the
power supply and switch it on. This can take a few hours!
Servicing, adjustment and repair work must only be done by a
qualified technician/service centre. There are no components
inside the device requiring adjustment or servicing by the user.
In commercial establishments, the accident prevention
52
Cortesía de www.bateriasdelitio.eu
regulations laid down for electrical equipment by the
appropriate trade associations must be observed. In schools,
educational facilities, hobby and DIY workshops, operation
of the product must be supervised by trained personnel.
If you are not certain about the right way to connect or
operate the device, or if any other questions that are not
covered in the operating instructions arise, please contact our
technical inquiry department (see p. 31) or a qualified
workshop.
Do not place the charger on valuable furniture, even for
storage when not in use. The rubber feet may cause
discolouration due to chemical reactions, and may also
make pressure marks. Choose a suitable surface.
If the charging cable is designed for a separate charging
adapter, only the original adapter supplied by your dealer
must be used.
Never leave the charger to operate unsupervised. When the
charger is not in use, disconnect it from the mains power
supply and from the battery. Never insert pointed objects
(such as sewing or knitting needles, ballpoint pens, paper
clips etc.) into the ventilation slots or other openings in the
device; there is a risk of a potentially fatal electric shock and
of damaging the device!
Never place any objects or containers with liquid (such as vases,
glasses, bottles) on or next to the charger or the connected
battery. Liquid that gets into the device can damage both the
charger and any battery that is connected, in addition to which
there is a risk of a potentially fatal electric shock!
Cortesía de www.bateriasdelitio.eu
Hazards
53

Publicidad

Tabla de contenido
loading

Productos relacionados para ProCharger XL

Tabla de contenido