Manual Navigation (Without Vacuuming); Directing The Robot Vacuum Cleaner To The Base Station; Operating Modes; Select Operating Mode - Miele SLQL0 Instrucciones De Uso

en
vacuum cleaner will not move.
rLOC in the display can only be can-
celled by pressing the button or the
sensor several times.
Manual navigation (without vacuum-
ing)
You can use the direction buttons on
the remote control to direct the robot
vacuum cleaner to a specific area of the
room.
 Press and hold one of the direction
buttons.
The robot vacuum cleaner will travel in
the desired direction without vacuum-
ing.
You cannot direct the robot vacuum
cleaner manually to the base station in
order to recharge it.
Directing the robot vacuum cleaner
to the base station
(only possible when vacuuming was
started from the base station)
 Press the Base button on the remote
control or the Base sensor on the
display.
The robot vacuum cleaner will travel to
the base station and recharge.
52

Operating modes

There are five different operating op-
tions.
Auto
Standard vacuuming for
normally soiled flooring.
Spot Targeted vacuuming of an
area approx. 1.8 x 1.8 m
around the selected starting
point of the robot vacuum
cleaner.
Base
Directing the robot vacuum
cleaner to the base station.
Turbo
For vacuuming lightly soiled
flooring with a short vacu-
uming duration.
Silent
Vacuuming with low noise
development.

Select operating mode

 Press the Power button on the re-
mote control.
There are two ways of selecting the op-
erating mode.
Option 1 (Remote control)