OPERATION ______________________________
Power supply
You operate the scales with 2 x 1.5V LR3/AAA
batteries (total 3 V).
1
Open the cover of the battery compartment
.
I
2
Insert the 1.5V LR3/AAA batteries. Pay atten-
tion to the poles marked on the base of the
battery compartment.
3
Close the cover of the battery compartment
.
I
Notes
▪
Do not expose the battery to extreme heat, for
example sunlight, radiators, fire, etc.
▪
When the batteries are becoming flat, the dis-
play shows »
«. Replace the batteries im-
mediately.
▪
Remove the batteries if they are used up or if
you do not use the device for a long time. We
do not assume liability for damage caused by
leaked batteries.
Environmental note
The batteries, even those free from heavy metals,
must not be disposed of as domestic waste. Used
batteries must be discarded in used battery col-
lection containers found at commercial or public
waste management services.
Operating the scales
Notes
▪
No data needs to be entered for measuring
the body weight.
▪
The scales measure your body weight in 100
g intervals.
▪
The very accurate 4-point measurement is
used as the measurement method.
1
Use the switch
(at the rear) to specify whether
H
you want to use Anglo-Saxon units of measure
(lb/in) or European units of measure (kg/cm).
2
Place the scales on a flat and even surface.
20
ENGLISH
3
Switch on the scales by tapping your foot once
on the right lower corner of the glass plate
–
Display: »
4
As soon as »
step carefully onto the scales.
5
Stand still on the glass plate until the displayed
weight flashes twice and no longer changes.
–
Your body weight is shown on the display.
–
After 5 seconds, the scales automatically
switch off.
Note
▪
If the display shows »
ing process, the scales have been overloaded.
After 5 seconds, the scales automatically
switch off.
« in the display
E
.
« appears on the display,
« during the weigh-
.
F