Bartscher 110801 Manual Del Usario página 38

Setting the desired value (desired temperature)
To set and adjust the desired value:
•
press
•
increase or decrease the value by pressing
•
confirm the set value by pressing
Defrost
Automatic defrost
The device defrosts automatically 3 times every 24 hours. The clock is activated when
the device is first turned on.
To reset the defrost cycle, press
show the symbol
defrost will take place after 8 hours.
Manual defrost
Manual defrost can be activated at any time be pressing
for over 3 seconds.
Manual defrost will be activated and the display will show the symbol
NOTE!
If any parameters or other settings must be changed, follow the attached
instructions for temperature regulation or contact service personnel.
- 34 -
for 1 second: the set value will begin flashing;
. The device will immediately begin a defrost cycle and the next
or
.
and hold for over 3 seconds. The display will
;
and holding
.