MicroPower MTM-HF 3200 Instrucciones De Uso página 6

English
Secure the battery charger by hooking the cable suspension plate to the bottom
edge of the charger and by screwing it tight into the wall.
The battery charger is produced in different mains voltage variations. Check that
the power supply at the site of the installation complies with the rate voltage
according to the information on the battery charger's rating plate.
The recommended mains fuse is specified on the battery charger's rating plate. Use
delay action fuses.
The battery charger is supplied with a cable and an adapter for power supply
connection to a grounded wall socket or safety switch. MTM-HF 3200 is intended
for 1-phase installation and MTM-HF 6000 and 8000 are intended for 3-phase
installation.
The red cable is connected to the battery's positive pole and the black or blue cable
is connected to the battery's negative pole.
6