Chemfree SW-23 Manual De Operación página 12

Ocultar thumbs Ver también para SW-23:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SmartWash
Operating Manual
Issue - EXCESSIVE OIL
If you replace all of the OzzyJuice, rinse the base of
Issue - EXCESSIVE FLUID LOSS:
the SmartWasher to remove all excess oil and dirt.
Once unit has been cleaned, replace the sink and
add a new OzzyMat and 25 gallons (five, 5-gallon
containers) of new OzzyJuice.
Issue - EXCESSIVE FLUID LOSS:
7
ChemFree Technical Support : 800-521-7182 www.chemfree.com
r e
®
Ozzy
®
DUMPED IN SYSTEM
1.
Unplug the SmartWasher and lift the sink off the base.
2.
Skim excessive oil off the top of the OzzyJuice or place an absorbent pad on
top of the fluid, soak up the oil and dispose of it in accordance with local
regulations.
3.
In extreme cases, it may be necessary to replace all of the OzzyJuice in the
SmartWasher. Dispose of contaminated OzzyJuice and OzzyMats according
to local regulations.
4.
If you replace all of the OzzyJuice, rinse the base of the SmartWasher to
remove all excess oil and dirt.
5.
Once unit has been cleaned, replace the sink and add a new OzzyMat and 15
gallons ((3) 5-gallon boxes) of new OzzyJuice.
With "normal usage" you should have to add a five gallon container of
OzzyJuice approximately every 6 to 8 weeks. "Normal usage" means
the equivalent of several users in a 10 hour day in a standard
maintenance, repair and operation facility or several users in a
multiple bay garage facility.
a.
Check the fluid temperature, If the temperature is above 120°F (49°C) the
thermostat is not working properly. Temperatures above 120°F (49°C) will
increase the rate of evaporation.
b.
Examine closely where the sink and base meet. Are there any gaps? Is the
base bowed? Is the sink warped? The SmartWasher operates as a closed
system; any gaps will provide space for air to enter and condensation to
escape.
c.
Is the SmartWasher "leaking"? Where is it "leaking" from? Make sure the
nozzle and brush are flowing into the sink. If the fluid is leaking from the body
of the base? The base will need to be replaced.
d.
If none of the previous apply, this rules out any problem with the SmartWasher
itself. Make sure you and your coworkers are aware that certain practices can
cause you to use excessive amounts of OzzyJuice.
TROUBLE SHOOTING Continued
If excessive oil is dumped into the SmartWasher,
take the following steps to remedy the situation;
CHECKING for Problems:

Publicidad

Tabla de contenido
loading

Tabla de contenido