Proper Use, Care And Maintenance - Chemfree SW-23 Manual De Operación

SmartWash
Operating Manual
To keep your
operating at its best remember
these
IMPORTANT TIPS:
The heater is disabled as long
as the "Add Fluid" light is on.
The SmartWasher
designed to "eat" the oil and
grease washed from dirty
parts. It is NOT designed to
function as a waste-oil dump!
The Ozzy microbes will thrive
on oil and grease washed
from parts during normal use.
If excessive oil, gasoline,
transmission fluid, antifreeze
or similar fluid is dumped into
the system,
microbes may be destroyed.
DO NOT ADD – WATER,
BLEACH, DISINFECTANTS,
INSECTICIDES OR BIOCIDES
OF ANY DESCRIPTION.
Peel the top layer off the
OzzyMat once a week.
Change the OzzyMat every
month.
To maintain the effectiveness
of the SmartWasher, it is
imperative that nothing be
added to the OzzyJuice other
than replacement OzzyJuice,
or dirty parts residue.
Turn off pump when not
actually washing parts. This
will help to decrease fluid
evaporation.
Do not clean paint brushes in
the SmartWasher;
microbes will not consume the
inorganic pigments in paint.
3
ChemFree Technical Support : 800-521-7182 www.chemfree.com
r e
®
Ozzy ®
Suggested Annual Maintenance:
new system
1.
is
2.
3.
the Ozzy
4.
5.
Ozzy
6.
PROPER USE, CARE & MAINTENANCE
Simply pump out the fluid into containers
until the machine is drained.
Unplug the SmartWasher.
Remove the sink from the base. Inspect
and remove any sludge that might have
accumulated on the bottom of the unit.
Clean the base with water to remove any
debris.
Visually check the condition of the hoses,
connectors, etc. If everything appears to
be in good working condition, reassemble
sink, change OzzyMat, and return the
OzzyJuice to the SmartWasher.
If you fail to maintain your
SmartWasher, you may still be able
Simply perform the annual maintenance
described
OzzyBooster for an extra supply of
microbes to bring your fluid back into
conformity. If your fluid had developed an
odor, you may also add Odor Neutralizer.
to save your fluid:
above and then add