Seago SEAGUARD 165 Manual Del Propietário página 23

HOW TO TEST YOUR LIFEJACKET USING THE ORAL INFLATOR
1. To test your inflatable lifejacket, you will not need any spare parts, or re-arming kits.
2.
Remove the CO2 cylinder/bayonet assembly, to prevent inadvertent activation of the
manual inflation system, which could potentially damage the lifejacket. Unscrew and
remove the activator capsule otherwise, the lifejacket will inflate when immersed in water.
3.
Put on the lifejacket
4. Get into shallow water, just deep enough that you can stand with your head above the
surface.
5. If you are a weak swimmer or non-swimmer, inflate the lifejacket partially so that you are
supported well enough to be able to complete inflation without touching bottom.
6.
Fully inflate the lifejacket using the oral inflator.
7. See if the lifejacket will float you on your back or just slightly back of vertical. In a relaxed
floating position, verify that your mouth is well above the water's surface. Note the effect of
where you hold your legs on how you float.
8. Get out of the water and remove the lifejacket. Completely deflate the lifejacket using the
oral inflator.
9. Let the lifejacket dry thoroughly. See Cleaning and Stowage of your lifejacket. Re-arm and
repack the lifejacket refer to 'FOLDING AND REPACKING' section.
EACH OF THESE DEVICES IS INTENDED TO HELP YOU SAVE YOUR LIFE
For your lifejacket to function properly, follow these suggestions to verify that it fits, floats, and
remains in good condition.
1. Check the inflation mechanism status indicator before each use.
2.
Get into the habit of re-arming the inflation mechanism immediately after each CO2
inflation (be sure the inflator is dry before re-arming).
3.
Try your lifejacket on and adjust it until it fits comfortably in and out of the water.
4. Mark your lifejacket with your name if you are the only wearer.
5. Do not alter your lifejacket. If it doesn't fit properly, get one that does.
6. Your lifejacket is not intended for use as a fender or kneeling pad.
7. If your lifejacket is wet, allow it to dry thoroughly before storing it. Store it in a
well-ventilated area.
8. Do not dry your lifejacket in front of a radiator or other source of direct heat.
TESTING YOUR LIFEJACKET
19