Print Screen Function (Only Tv Explorer Ii+); Tv Operating Mode - Promax TV EXPLORER II Manual De Instrucciones

USER'S MANUAL. TV EXPLORER II/II+
5.20

PRINT SCREEN function (only TV EXPLORER II+)

It is also possible to save anything that appears on the screen of the meter using
the "PRINT SCREEN" function. To save an image you only need to press the key
[10] during a few seconds. A file with the screen content in bit map format (bmp) will
be generated automatically. These files can be viewed later on using any program that
supports .bmp formats.
To delete one or more of the captured images, press
PRINT SCREEN. You will see a list of captured screens files. To delete a file, place on it
and press the rotary selector [1]. To delete all stored files place on ALL option and press
the rotary selector [1].
NOTE: You cannot use this function in the case of OSD messages.
5.21

TV Operating Mode

When pressing the
/ II+ accedes to the TV mode, and tries to demodules on the monitor the currently video
signal on tune.
In the monitor will appear the TV picture with a window on the lower part to show,
for five seconds whenever the signal is analogue; the channel number, the frequency,
the active channel set, the colour system and the TV standard.
CHANNEL:
CCIR
FR:
Figure 59.- Analogue channel monitoring.
12/2013
[10] key from any mode of operation the TV EXPLORER II
S10
168.25 MHz
[22] and select DELETE
50 Hz
PAL BG
Page 81