Description Of The Inputs And Outputs; Rf Input; Usb Port; Scart (Din En 50049) - Promax TV EXPLORER II Manual De Instrucciones

USER'S MANUAL. TV EXPLORER II/II+

6 DESCRIPTION OF THE INPUTS AND OUTPUTS

6.1

RF input

The RF input is through the RF
signal level should never exceed 130 dBμV.
6.2

USB port

The TV EXPLORER II / II+ incorporates an USB port, which enables the
communication with a PC, and to download dataloggers and channel plans through the
software NetUpdate.
Figure 67.- USB connector in rear panel. External view.
6.3

Scart (DIN EN 50049)

Figure 68.- Scart socket (external view).
Also known as PERITEL connector (in conformity with standard NF-C92250). The
signals in this connector are the following:
PIN number SIGNAL
1 Right channel audio output
2 Right channel audio input
3 Left channel audio output
4 Audio grounding
5 Blue grounding (B)
6 Left channel audio input
7 Blue output (B)
8 Switching voltage
9 Green grounding (G)
10 Digital bus interface
11 Green output (G)
12 Digital bus interface
13 Red grounding (R)
14 Digital bus reserved
15 Red output (R)
16 Blanked signal
17 Composite video grounding
18 Blanked return
19 Composite video output
20 Video input
21 Connector shield grounding
12/2013
[30] connector on the side panel. The peak
Table 6.- Description of the Scart.
CHARACTERISTICS
(not connected)
(not connected)
(not connected)
(not connected)
(not connected)
Page 91