FujiFilm Instax mini Link Manual De Instrucciones página 11

Simple Printer Care
■ Printer Care
1. Do not open the film door until you have used up the
film; otherwise, the rest of the film is exposed and
turns white and the film can no longer be used.
2. Your printer is a fragile object. Do not expose it to water,
sand or gritty materials and do not drop.
3. Do not use solvent such as thinner or alcohol to remove
dirt.
4. Keep the film chamber and printer interior clean to avoid
damaging films.
5. Do not leave your printer in direct sun, or hot places
such as a car. Do not leave it in damp places for long
periods.
6. Moth repellent gas such as naphthalene may affect your
printer and prints. Be careful to keep your printer and
prints in a safe, dry place.
7. Note that the temperature range within which your
printer can be used is +5°C to +40°C.
8. Take great care to ensure that printed materials do not
violate copyright, image rights, privacy or other personal
rights and do not offend public decency. Actions that
violate the rights of others, are contrary to public
decency or constitute a nuisance may be punishable by
law or otherwise legally actionable.
9. This printer is designed for household use. It is not
suitable for commercial printing which requires a large
amount of printing.
■ Charging the Battery
The battery is not charged at shipment. Charge the
battery completely before use.
BO-D_WW_14lang.indb 11
Charge the battery using the supplied USB cable. Charging
times will increase at ambient temperatures below +10 °C
or above +35 °C. Do not attempt to charge the battery at
temperatures above +40 °C or at temperatures below +5 °C
as the battery will not charge.
■ Battery Life
At normal temperatures, the battery can be recharged
about XXX times. A noticeable decrease in the length of
time the battery will hold a charge indicates that it has
reached the end of its service life.
■ Cautions: Handling the Battery
The battery and printer body may become warm to the
touch after extended use. This is normal.
■ Certification marks acquired by the printer are located
inside the film chamber.
■ Cautions During Printing
EN
11
2019/5/16 15:58:24