Charging The Battery - FujiFilm Instax mini Link Manual De Instrucciones

EN

Charging the Battery

Be careful to properly attach the USB cable as indicated.
Connect the printer using the supplied USB cable to a USB AC
adapter (supplied with your smartphone) then connect the USB
AC adapter to an indoor power outlet.
• You can print an image while charging is in progress.
• Charging time is approximately
6
BO-D_WW_14lang.indb 6
Battery and charging status indication with the LED
You can check the battery status when the printer is turned on
and not connected with the app.
You can check the battery status with your smartphone when
connected with the app.
Indication
To an indoor
LED flashes in red
power outlet
LED lights up in red
LED flashes in
green*
LED lights up in
green
* When the printer is turned off, the LED goes off after the
charging is completed. When the printer is turned on and not
connected with the app, the LED lights up in green after the
X to X hours.
charging is completed.
Charging status Battery status
Charging
Low level
—
Almost charged
Over half level
—
2019/5/16 15:58:22