DeWalt DW441 Manual De Instrucciones página 6

FIG. 4
PAD
FIG. 5
TORX HEAD
SCREWS
CFS DISC
ALIGN NOTCHES
TO THOSE IN
SHROUD
FIG. 6
Operation
To operate your sander, grasp it as shown in FIG. 5 and turn it on.
Move the unit in long, sweeping strokes along the surface being sand-
ed, letting the sander do the work.
NOTE: Excessive downward pressure on the tool while sanding actu-
ally slows the removal rate and produces an inferior quality surface.
A side handle has been provided with your unit and can be used if
desired. The side handle can be screwed into either side of tool by first
removing the plastic screw, as shown in FIG. 6.
NOTE: Be sure to check your work often, this sander is capable of
removing material rapidly, especially with coarse paper.
The random orbital action of your sander allows you to sand with the
grain or at any angle across it for most sanding jobs. To produce the
best finish possible, start with coarse grit sandpaper and change grad-
ually to finer and finer paper. Vacuum and wipe surface with a tack
cloth between grit steps.
The rate at which the dust bag fills up will vary with the type of mate-
rial being sanded and the coarseness of the sandpaper. For best
results, empty the bag frequently.
When sanding painted surfaces, (see page 5 for additional precau-
tions when sanding paint) you may find that the sandpaper loads up
and clogs with paint. A heat gun will work much better to remove paint
before sanding. FOLLOW ALL SAFETY INSTRUCTIONS IN HEAT
GUN INSTRUCTION MANUAL.
NOTE: (DW441 and DW444 only): When using PSA sanding discs, it
is necessary to remove the disc soon after operation. PSA papers, if
left on during tool storage, sometimes become difficult to remove. To
aid in the removal of old PSA paper, sand for a few minutes to soften
adhesive backing prior to changing disc.
Precautions To Take When Sanding Paint
1. Sanding of lead based paint is NOT RECOMMENDED due to the
difficulty of controlling the contaminated dust. The greatest danger
of lead poisoning is to children and pregnant women.
4