Operating Manual; Important Safety Information; Before Use - WMF KULT X Instrucciones De Uso

Operating Manual

Important safety information

▪ Switch off the appliance and disconnect from the mains supply
before changing accessories or approaching parts that move in use.
▪ After using the appliance and accessories, clean all surfaces/parts
that have come into contact with food. Follow the instructions in
the "Cleaning and care" section.
▪ These attachments are intended for use only with the WMF KULT X
spiralizer.
▪ Please note the safety precautions for the WMF KULT X spiralizer.
▪ Caution: The knives and blades are sharp! Handle with care to avoid
injury.
▪ Do not reach into it the feeder during processing or insert anything
other than the provider plunger.
▪ Do not reach into the attachment while it is in operation.
▪ Be careful to prevent e.g. hair and loose items of clothing getting
caught in the feeder.
▪ Before removing the cutter insert, always wait for the motor and
the cutter insert to stop moving.
▪ The appliance must be switched off and disconnected from the
mains before accessories or additional parts that move during
operation are replaced.

Before use

These attachment may be used only for the intended purpose as stipulated in these instructions for
use. You are therefore advised to read the instruction manual carefully before use. These contain
instructions for using, cleaning and caring for the attachments. We accept no liability for any damage
caused by a failure to heed the instructions. Keep this instruction manual in a safe place and pass it
on to any subsequent user together with the attachments. Please also note the warranty information
at the end.The attachments are not intended for commercial use, but only for the preparation of
household quantities of food.
The safety precautions must be observed during use.
6