Encoding Of Cd/Phono Into Mp3 File; Phono Encoding - Roadstar HIF-1899TUMPK Manual De Instrucciones

5 English
back.
4. Press the" TAPE FORWARD / EJECT " Button (33) completely inwards and the
cassette tape will be ejected through the cassette door cover (34).

ENCODING OF CD/PHONO INTO MP3 FILE

The system is able to encode normal cd, cassette or turntable to mp3 format and re-
cording at memory media with usb connecting port.
CD ENCODING
Encoding 1 track:
1. Perform normal playback of the cd track you want to encode & record,
2. Press " record " button (9) twice during the playback of the desire track, unit will
display. Encoding is performing now.
3. Press the STOP button to finish recording the track.
Encoding 1 disc:
1. Place a cd with the printed side facing up inside the tray & then close the co door
2. Press the RECORD button (9) twice after focus search completed. unit will display
"REC". Encoding is performing now.
3. After completing of encoding, unit will stop playback automatically.
Remarks:
The recording speed is 1:1 and according to the actual plying time of the cd track.

The system will creat a " RECORD " folder and then store the encoding track in it.

The recording format is preset at – mp3 bit rate: 128 kbps, sampling rate: 44.1khz.

No song title will be recorded during encoding mode.

To interrupt the recroding, press the " record " button again during record mode.

Recording will be completed only entire song being encoded, if terminate the enco-

ding process intermediately, there is no track being recorded nor stored to the usb.
Copying of MP3/WMA file
If putting a mp3/wma disc instead of a cd-disc, the system will copy the files to the
usb or sd card if press the " record " button (9). The operation procedures is same as
cd encoding as stipulate on above, and the system will switch to copying mode only if
mp3/wma file being read.

PHONO ENCODING

1. Insert the USB device.
2. Press the function button to " phono ".
3. Start playback at phono for the track which you want to record to usb.
4. Press the RECORD button two times to start encoding.
5. The display show REC.
6. After finish of recoding, press the STOP button to stop recording.
CASSETTE ENCODING
1. Insert the USB device.
2. Press the function button to "TAPE".
3. Start playback at TAPE for the track which you want to record to USB.