Sears Kenmore 253.6152 Serie Manual De Uso Y Cuidado página 8

First Steps
Leveling
All four corners of your refrigerator must
rest firmly on a solid floor. Your refrigerator
is equipped with adjustable front rollers or
front leveling screws to help level your unit.
To Level Your Refrigerator:
1. Remove toe grille
by grasping it
with both hands
and pulling
straight out.
2. Use flat-blade
screwdriver
or 3/8 inch socket wrench to adjust
front rollers. Use adjustable wrench to
Tools Necessary:
adjust leveling screws.
NOTE
First, use the leveling screws to raise
the front of the refrigerator enough so
the doors close freely when opened Phillips Head
halfway. The refrigerator should slope
Quadrex Head
1/4 inch to 1/2 inch from front-to-back.
Screwdriver
Then use the same leveling screws to
level the refrigerator from side-to-side.
(OR)
Socket
Wrench Set
Adjustable Front Roller
(some models)
Stationary Front Roller
with Leveling Screw
(some models)
or
Raise
OR
Raise
Door Removal/Reversal
Tools Necessary:
Phillips Head
or
Quadrex Head
Screwdriver
(OR)
Socket
Wrench Set
Plastic
Putty
Knife
Adjustable
Wrench
Door Stop
Screw
Top
Hinge
Screw
8
(OR)
OR
Adjustable
Wrench
Awl
Pliers
Handle
Screw
Bottom
Center
Hinge
Hinge
Screw
Screw
Socket
Wrench Set
Plastic
Putty
Knife
Plie