Connecting Air Conditioning Unit Fl1600, Fl2200; Connecting Air Conditioning Unit Fw3000 - Dometic DC-Kit PP 12 Instrucciones De Montaje

DC-Kit PP12, DSP-T12/24
➤ Attach the air outlet unit of the air conditioner (fig. 5, page 6).
➤ Route the connecting cable for remote control DSP-RCT to the inverter and con-
nect it ( inverter).
7.4

Connecting air conditioning unit FL1600, FL2200

➤ Remove the air outlet unit of the air conditioner; if necessary remove the top
cover ( FL1600, FL2200) (fig. 7, page 8).
➤ Connect the on/off cable for the FreshLight to the connection socket on the
circuit board (fig. 8, page 9).
I
NOTE
Guide the on/off cable carefully past the fan.
➤ Connect the adapter cable to the on/off cable.
➤ Connect the extension cable to the adapter cable.
➤ Connect the extension cable to connections I2 and I5 on the charging current
distributor (fig. 4, page 6).
➤ Attach the air outlet unit of the air conditioner ( FreshLight) (fig. 7, page 8).
➤ Route the connecting cable for remote control DSP-RCT to the inverter and
connect it ( inverter).
7.5

Connecting air conditioning unit FW3000

➤ Connect the on/off cable for FW3000 to the connection socket on the
connector panel (fig. 9, page 9).
I
NOTE
Guide the on/off cable carefully past the fan.
➤ Connect the adapter cable to the on/off cable.
➤ Connect the extension cable to the adapter cable.
➤ Connect the extension cable to connections I2 and I5 on the charging current
distributor (fig. 4, page 6).
➤ Route the connecting cable for remote control DSP-RCT to the inverter and
connect it ( inverter).
EN
Installing and connecting the DC kit
21