Time; Displaying The Time; Setting The Time; Selecting 12/24-Hour Clock Mode - Blaupunkt Calais MP48 Instrucciones De Manejo E Instalación

Time

Time

Displaying the time

To show the time for approx. 10 seconds on
the display,
u
press and hold down the MENU button
7 for longer than 2 seconds.

Setting the time

u Press the MENU button 7.
u
Press the or
edly until "TIMESET" appears on the
display 6.
After approx. 2 seconds, the current time
appears on the display 6. In 24-hour
mode, "24H" appears in front of the time,
and in 12-hour mode "AM" or "PM". The
hours fl ash and can be adjusted.
To adjust hours or minutes,
u
press the or
To switch between hours and minutes,
u press the 6 button <.
Note:
You do not have to wait for the display
of the current setting to change it by
pressing the or
To exit the menu,
u press the MENU button 7.
Selecting 12/24-hour clock
mode
u Press the MENU button 7.
u
Press the or
edly until "24H MODE" or "12H MODE"
appears on the display 6.
u
Press the or
among the modes.
44
button 8 repeat-
button 8.
button 8.
button 8 repeat-
button 8 to select
To exit the menu,
u press the MENU button 7.
Adjusting the time zone
(TIMEZONE)
If you move across time zones, you can ad-
just the time difference to the currently set
time in 1-hour increments. This allows you
to correct the display of the time for the cur-
rently valid time zone without having to re-
adjust the time itself.
u Press the MENU button 7.
u
or
Press the
edly until "TIMEZONE" appears.
After approx. 2 seconds, "ZONE" and
the current setting are shown on the dis-
play 6.
u
Press the or
the time difference in increments of
1 hour between –12 and +12.
Note:
You do not have to wait for the display
of the current setting to change it by
pressing the or
To exit the menu,
u press the MENU button 7.
button 8 repeat-
button 8 to adjust
button 8.