Dolby Surround; Playing Dolby Surround Sound - Aiwa NSX-DS8 Manual De Instrucciones

DOLBY SURROUND

With this unit's built-in Dolby Digital decoder and surround
speaker system (the center and surround speaker units supplied
in addition to the left and right front speakers), video software
recorded in Dolby Digital or Dolby Pro Logic can be played back
in full scale home theater sound.
Dialogs are heard in the front and center sound field, while
ambient sounds like cars and crowds are reproduced on all sides
of the listener, all in all for an incredibly lifelike audio-visual
experience.
Dolby Pro Logic has four independent channels; left, center,
right, and surround. These four channels are encoded into the
two tracks of a conventional stereo program source. This unit's
Dolby Digital decoder recovers these four channels on playback.
Dolby Pro Logic software is marked with the Hlogo.
Dolby Digital, in contrast to Dolby Pro Logic, is digitized,
and has separate left and right surround channels plus an
additional low-frequency effects (LFE) channel. Thus it is also
referred to as "5.1-channel" Dolby Digital, with the LFE channel
counted as "0.1" channel.
Dolby Digital software is marked with the
NOTE
• Dolby Digital sound and Dolby Pro Logic sound can only be
obtained when playing back software with their respective logos.
• Make sure all the supplied speakers are placed and connected
properly (pages 4 and 5).
• Make sure your video equipment and TV are connected properly
(page 5). Dolby Digital playback requires digital connection
between your video equipment and this unit.
• Make sure your video equipment can play back the particular
medium of your Dolby Digital or Dolby Pro Logic software (LDs
or DVDs, for example). Consult the operating instructions for
your equipment. You cannot play DVDs on the unit's CD player.
• External digital input of this unit accepts Dolby Digital bitstream
signals, or linear PCM signals with a sampling frequency of 32
kHz, 44.1 kHz or 48 kHz. This unit cannot play software whose
sampling frequency is 96 kHz.
• Some DVD players connected digitally to this unit may cause
noise during some DVD operation such as when searching a
disc, skipping a chapter, etc.
PLAYING DOLBY SURROUND
SOUND
Select digital input for a Dolby Digital disc, and analog input for
a Dolby Pro Logic software.
logo.
Playing Dolby Digital Sound
For software with the
1 Select the source.
If your video equipment is connected to the DIGITAL IN
OPTICAL jack; hold down VIDEO1/DVD/AUX.
If your video equipment is connected to the DIGITAL IN
COAXIAL jack; hold down VIDEO2/LD/MD.
"ANALOG" and "DIGITAL" appear alternately on the display.
Release the button when "DIGITAL" is shown.
The DIGITAL indicator lights up on the display, and digital
input from your equipment is selected as the source.
2 Play the Dolby Digital source on your video
equipment.
The DOLBY DIGITAL indicator lights up on the display, and
audio is reproduced in Dolby Digital sound.
Playing Dolby Pro Logic Sound
For software with the H logo.
1 Select the source.
If your video equipment is connected to the VIDEO1/DVD/
AUX jacks; hold down VIDEO1/DVD/AUX.
If your video equipment is connected to the VIDEO2/LD/
MD jacks; hold down VIDEO2/LD/MD.
"ANALOG" and "DIGITAL" appear alternately on the display.
Release the button when "ANALOG" is shown.
Analog input from your equipment is selected as the source.
2 Play the Dolby Pro Logic source on your video
equipment.
3 Press DOLBY SURROUND.
The DOLBY PRO LOGIC indicator lights up on the display,
and audio is reproduced in Dolby Pro Logic sound.
logo.
21
ENGLISH
En