8) MAINTENANCE
A. Cleaning
Periodically clean the meter with a soft cloth slightly wet with water or mild
detergent, and take care to not remove the overlay. Do not use abrasives
or solvents, or even alcohol.
B. Battery Replacement
Replace the battery when the low battery indicator appears in LCD display.
Replace the battery immediately in order to keep the instrument in normal
operation condition. Follow the instructions below to replace the battery.
a) Check if the instrument is not connected to any circuit. Set the rotary
switch to OFF and remove the test leads from input terminals.
b) Remove the three screws, at the rear side of instrument.
c) Remove the old battery and replace it with a new battery, with the same
specifications.
d) Place the battery cover and the screw.
22